Compare
| Kit | Kit price | A-la-carte | Save | Inside |
|---|---|---|---|---|
| FTC Hardware KitFTC · SR-KIT-FTC-HEX | $168.99 | $187.80 | $18.81 | 7 mm hex + SplineXS axles, 8 mm bearings, 8 mm collars |
| FTC Channel KitFTC · SR-KIT-FTC-CHANNEL | $179.99 | $199.80 | $19.81 | 20× 424 mm 17-hole channel |
| FTC Servo KitFTC · SR-KIT-FTC-SERVO | $479.99 | $532.88 | $52.89 | Speed / Balance / Torque, Slim, Nano, programmer, Titan |
| FTC Spike Motor KitFTC · SR-KIT-FTC-SPIKE | $431.99 | $479.90 | $47.91 | 10 Spike planetaries (3.7, 5.18, 13.7, 19.2, 27, 50) |
| FTC Season KitFTC · SR-KIT-FTC-SEASON | $1,624.99 | $1,805.47 | $180.48 | Drive V2, Slides, servos, Spike, channel, FTC hardware |
| FRC ½" Hex KitFRC · SR-KIT-FRC-HEX | $215.99 | $239.84 | $23.85 | ½" hex axles, bearings, collars, hubs |
| FRC Tube KitFRC · SR-KIT-FRC-TUBE | $714.99 | $794.75 | $79.76 | 0.125 grid tube, ⅛" endcaps, 20-pack connectors |
| FRC Season KitFRC · SR-KIT-FRC-SEASON | $1,463.99 | $1,626.57 | $162.58 | Tube, CANnect, Ascend, ½" hex hardware |
| Sheet Material KitEither · SR-KIT-SHEET | $552.99 | $614.91 | $61.92 | one of each ABS / AL7075 / acetal / PC / Composite |
Kit price vs buying the parts separately. Contents are the PDP summaries. Screws and standoffs are sold separately as Loadout.
SWYFT Team Kits cost less than buying the same parts separately. The crossed-out price is the current total if you buy every line on its own. Pick a kit below to open its contents.
FTC kits use 7 mm hex, 8 mm bearings, and SWYFT Channel. FRC kits use 1/2" hex and SWYFT Tube — the two programs do not share hardware. Screws and standoffs are sold separately as SWYFT Loadout Parts Bundles.
| Kit | Price | Save | What's inside |
|---|---|---|---|
| FTC | |||
| FTC Hardware Kit | $168.99 |
Save $18.81 | 7 mm hex + SplineXS axles, 8 mm bearings, 8 mm collars |
| FTC Channel Kit | $179.99 |
Save $19.81 | 20× 424 mm 17-hole channel |
| FTC Servo Kit | $479.99 |
Save $52.89 | Speed / Balance / Torque, Slim, Nano, programmer, Titan |
| FTC Spike Motor Kit | $431.99 |
Save $47.91 | 10 Spike planetaries (3.7, 5.18, 13.7, 19.2, 27, 50) |
| FTC Season Kit | $1,624.99 |
Save $180.48 | Drive V2, Slides, servos, Spike, channel, FTC hardware |
| FRC | |||
| FRC 1/2" Hex Kit | $215.99 |
Save $23.85 | 1/2" hex axles, bearings, collars, hubs |
| FRC Tube Kit | $714.99 |
Save $79.76 | 0.125 grid tube, 1/8" endcaps, 20-pack connectors |
| FRC Season Kit | $1,463.99 |
Save $162.58 | Tube, CANnect, Ascend, 1/2" hex hardware |
| Either | |||
| Sheet Material Kit | $552.99 |
Save $61.92 | one of each ABS / AL7075 / acetal / PC / Composite |
7 mm hex and SplineXS axles, 8 mm bearings, and 8 mm collars.
| Qty | Item | SKU |
|---|---|---|
| 10 | 7 mm hex AL7075 450 mm axle | SR-AXLE-HEX-7mm-450mm-AL7075 |
| 2 | 7 mm hex SS304 450 mm axle | SR-AXLE-HEX-7mm-450mm-SS304 |
| 2 | 15T SplineXS AL7075 450 mm axle | SR-AXLE-SPLINE-15T-450mm-AL7075 |
| 3 | 8 mm / 14 mm flanged bearing 10-pack (30 bearings) | BRG-8mm-14mm-01 |
| 2 | 8 mm clamping collar 10-pack (20 collars) | SR-COLLAR-8mm-CLAMPING |
| 1 | 8 mm set-screw collar 10-pack | SR-COLLAR-8mm-SETSCREW |
Twenty 424 mm 17-hole SWYFT Channel pieces for FTC frames and mechanisms.
| Qty | Item | SKU |
|---|---|---|
| 20 | 424 mm 17-hole channel | SR-CHANNEL-L48-424 |
Speed, Balance, and Torque V1.1, Slim and Nano, plus the programmer and Titan module.
| Qty | Item | SKU |
|---|---|---|
| 2 | Servo Speed V1.1 | SR-Servo-01 |
| 2 | Servo Balance V1.1 | SR-Servo-02 |
| 2 | Servo Torque V1.1 | SR-Servo-03 |
| 1 | Servo programmer | SR-Servo-10 |
| 2 | Slim servo | SR-SERVO-04 |
| 2 | Nano servo | SR-SERVO-05 |
| 1 | Titan Servo Module | SR-SERVO-TITAN-01 |
Ten SWYFT Spike planetary gearmotors across the most-used FTC ratios.
| Qty | Item | SKU |
|---|---|---|
| 2 | Spike 3.7:1 | SR-GEARBOX-36-01-04 |
| 2 | Spike 5.18:1 | SR-GEARBOX-36-01-05 |
| 2 | Spike 13.7:1 | SR-GEARBOX-36-02-14 |
| 2 | Spike 19.2:1 | SR-GEARBOX-36-02-19 |
| 1 | Spike 27:1 | SR-GEARBOX-36-02-27 |
| 1 | Spike 50:1 | SR-GEARBOX-36-03-50 |
Drive V2, Slides V2, servos, Spike, channel, and the entire FTC Hardware Kit.
| Qty | Item | SKU |
|---|---|---|
| 1 | Drive V2 module pack of 4 | SR-DRIVE-02 |
| 1 | Drive V2 frame kit | SR-DRIVE-FRAME-02 |
| 1 | Slides V2 full base (3× 350 mm) | SR-SLIDE-V2-350 |
| 2 | Servo Speed V1.1 | SR-Servo-01 |
| 2 | Servo Balance V1.1 | SR-Servo-02 |
| 1 | Servo Torque V1.1 | SR-Servo-03 |
| 1 | Servo programmer | SR-Servo-10 |
| 1 | Titan Servo Module | SR-SERVO-TITAN-01 |
| 2 | Slim servo | SR-SERVO-04 |
| 2 | Nano servo | SR-SERVO-05 |
| 2 | Spike 5.18:1 | SR-GEARBOX-36-01-05 |
| 2 | Spike 19.2:1 | SR-GEARBOX-36-02-19 |
| 1 | Linear odometry | SR-WHEELTRACKER-01 |
| 8 | 424 mm 17-hole channel | SR-CHANNEL-L48-424 |
| 10 | 7 mm hex AL7075 450 mm axle | SR-AXLE-HEX-7mm-450mm-AL7075 |
| 2 | 7 mm hex SS304 450 mm axle | SR-AXLE-HEX-7mm-450mm-SS304 |
| 2 | 15T SplineXS AL7075 450 mm axle | SR-AXLE-SPLINE-15T-450mm-AL7075 |
| 3 | 8 mm / 14 mm bearing 10-pack (30 bearings) | BRG-8mm-14mm-01 |
| 2 | 8 mm clamping collar 10-pack (20 collars) | SR-COLLAR-8mm-CLAMPING |
| 1 | 8 mm set-screw collar 10-pack | SR-COLLAR-8mm-SETSCREW |
| 1 | 1.5" intake wheels 4-pack, 7 mm hex | SR-INTAKEWHEEL-15-7MM |
| 1 | 2.5" intake wheels 4-pack, 7 mm hex | SR-INTAKEWHEEL-25-7mm |
| 1 | Ranger | SR-RANGER-02 |
| 1 | Sense | SR-LIMIT-01 |
| 1 | SWYFT electric screwdriver | SR-SCREWDRIVER-5NM |
| 1 | ABS grid sheet | SR-ABS-GRID-1.5 |
1/2" hex axles, flanged bearings, collars, and hubs for FRC mechanisms.
| Qty | Item | SKU |
|---|---|---|
| 10 | 1/2" hex AL7075 36" axle | SR-AXLE-HEX-0.5in-36in-AL7075 |
| 2 | 1/2" hex flanged bearing 10-pack (20 bearings) | BRG-1001 |
| 2 | 1/2" hex ultra-light collar 10-pack (20 collars) | SR-HUB-03 |
| 1 | 1/2" hex clamping split hub 10-pack | SR-HUB-01 |
| 1 | 1/2" round clamping collar 10-pack | SHC-0003 |
0.125 in grid 2×1 and 1×1 tube, matching 1/8 in endcaps, and a 20-pack of tube connectors.
| Qty | Item | SKU |
|---|---|---|
| 10 | Tube 0.125 in grid 2×1 × 47" | SR-TUBE-125-GRID-2X1-47 |
| 6 | Tube 0.125 in grid 1×1 × 47" | SR-TUBE-125-GRID-1X1-47 |
| 5 | 2×1 1/8" endcap 2-pack | SR-TUBEBLOCK-11 |
| 3 | 1×1 1/8" endcap 2-pack | SR-TUBEBLOCK-01 |
| 1 | Tube connector 20-pack | SR-TUBECONNECTOR-20 |
Tube, endcaps, connectors, CANnect, Ascend, and 1/2" hex hardware.
| Qty | Item | SKU |
|---|---|---|
| 8 | Tube 0.125 in grid 2×1 × 47" | SR-TUBE-125-GRID-2X1-47 |
| 4 | Tube 0.125 in grid 1×1 × 47" | SR-TUBE-125-GRID-1X1-47 |
| 4 | 2×1 1/8" endcap 2-pack | SR-TUBEBLOCK-11 |
| 2 | 1×1 1/8" endcap 2-pack | SR-TUBEBLOCK-01 |
| 1 | Tube connector 20-pack | SR-TUBECONNECTOR-20 |
| 1 | CANnect V2 swerve bundle | SR-CANNECT-V2-SWERVE |
| 1 | CANender Molex 4-pack | SR-CAN-41 |
| 1 | Ascend FRC elevator V2 | SR-ASCEND-V2 |
| 10 | 1/2" hex AL7075 36" axle | SR-AXLE-HEX-0.5in-36in-AL7075 |
| 3 | 1/2" hex bearing 10-pack (30 bearings) | BRG-1001 |
| 2 | 1/2" hex ultra-light collar 10-pack (20 collars) | SR-HUB-03 |
| 1 | 1/2" hex clamping split hub 10-pack | SR-HUB-01 |
| 1 | 1/2" round clamping collar 10-pack | SHC-0003 |
| 1 | 3.5" intake wheels 4-pack, 1/2" hex | SR-INTAKEWHEEL-35-12 |
| 1 | Ranger | SR-RANGER-02 |
| 1 | Sense | SR-LIMIT-01 |
| 1 | SWYFT electric screwdriver | SR-SCREWDRIVER-5NM |
One sheet of each live thickness: ABS grid, AL7075, acetal, polycarbonate, and SWYFT Composite.
| Qty | Item | SKU |
|---|---|---|
| 1 | ABS grid sheet 1.5 mm | SR-ABS-GRID-1.5 |
| 1 | AL7075 3 mm sheet | SR-AL7075-SHEET-3 |
| 1 | AL7075 6 mm sheet | SR-AL7075-SHEET-6 |
| 1 | Acetal 1/8" sheet 600 × 600 mm | SR-ACETAL-SHEET-3 |
| 1 | Polycarbonate 3 mm sheet | SR-PC-SHEET-3 |
| 1 | Polycarbonate 6 mm sheet | SR-PC-SHEET-6 |
| 1 | SWYFT Composite 1.75 mm | SR-SRPP-017 |
| 1 | SWYFT Composite 3 mm | SR-SRPP-03 |
| 1 | SWYFT Composite 6 mm foam-core | SR-SRPP-06 |
System Kits
